Fitting a Full Size Concert Harp In the Back of an R1S

installing of EveryAmp snapPlate on R1T

Morgan · 2024-12-22T17:10:59+00:00

Now that I've installed the SnapPlate front license plate holder, I finally filled out the EveryAmp review. Here it is. Hope it helps others: Shipped promptly, so the license plate holder arrived well before we picked up the car. Engineered and built VERY precisely to hold the plate very close to the front bumper without scraping. Installation instructions were clear, would have benefited from one more picture showing how to find the center slots in the grille. Grille Depth Adjustment instructions were also clear; with one half-turn adjustment of three screws, the license plate holder fit PERFECTLY in place. Check the EveryAmp web site for photographs of how much their product blocks the front camera image at every setting. After reviewing the photos, I chose the center setting. I find the camera interference at that setting is trivial for me. There's a lot of competition for the front-of-R1 real estate. My understanding is that Rivian's front plate holder requires drilling a hole in a perfectly good vehicle, and can also block a small part of the camera image. Tow hook mounts take a tow hook out of commission, and can block a sensor. EveryAmp's mount is designed to protect the grille by snapping off when attacked by a car-wash brush, so you have to dismount it (relatively easy to do) and remount it before washing. I'm still happy with the EveryAmp product, which we have installed in our R1S and now R1T. Very best wishes!

Rivian Mom

Member

Nov 8, 2024

The R1S definitely has a smaller trunk space compared to the R1T, but, due to the foldable seats of the R1S, a lot more storage room can be created, one big enough to even hold a full-size concert harp! I usually describe it as 80 lb. of fragility.

I saw it when a friend of mine used her R1S to carry it, and at first she was worried about the height of the tailgate. It turns out to be fine, as the harp enjoyed its maiden voyage in Eva, her R1S.

Fitting a Full Size Concert Harp In the Back of an R1S

Rivian Mom

Member

Attachments

Recent

installing of EveryAmp snapPlate on R1T

How to: TIGHT parking for R1S in garage

More Power & Faster in Rivian All Purpose Than Rivian Sport Mode - Confirmed with Data/Dragy

DIY: Black-out window shades for camping in my R1S

Custom Made 6' Hose for my R1S Air Compressor

DIY: 3 Cargo Crossbars on One Key for your R1S

the installation and software setup of the Rivian wall charger in a nutshell.

Rear Axle Area Fluid Leak on my R1T

Fridge Slider Install for R1S Cargo Area

BestEVMod Frunk Liners Installed for my R1S

Cross Bar Unboxing and Install on my R1T

Go Rhino Universal Hitch Step for Rivian: Not a perfect fit for R1S

Similar threads