Functions Of The Rivian R1T Crossbars

installing of EveryAmp snapPlate on R1T

Morgan · 2024-12-22T17:10:59+00:00

Now that I've installed the SnapPlate front license plate holder, I finally filled out the EveryAmp review. Here it is. Hope it helps others: Shipped promptly, so the license plate holder arrived well before we picked up the car. Engineered and built VERY precisely to hold the plate very close to the front bumper without scraping. Installation instructions were clear, would have benefited from one more picture showing how to find the center slots in the grille. Grille Depth Adjustment instructions were also clear; with one half-turn adjustment of three screws, the license plate holder fit PERFECTLY in place. Check the EveryAmp web site for photographs of how much their product blocks the front camera image at every setting. After reviewing the photos, I chose the center setting. I find the camera interference at that setting is trivial for me. There's a lot of competition for the front-of-R1 real estate. My understanding is that Rivian's front plate holder requires drilling a hole in a perfectly good vehicle, and can also block a small part of the camera image. Tow hook mounts take a tow hook out of commission, and can block a sensor. EveryAmp's mount is designed to protect the grille by snapping off when attacked by a car-wash brush, so you have to dismount it (relatively easy to do) and remount it before washing. I'm still happy with the EveryAmp product, which we have installed in our R1S and now R1T. Very best wishes!

Vincent

Member

Nov 4, 2024

Crossbars are a Rivian accessory for both the R1T and the R1S and it's been used to secure cargo from falling off. Most likely used with the gear cable to strap your cargo to your truck for extra safety.

For the R1T, the crossbars can either be fixed on the trunk or on top of your vehicle. With that, you can be able to carry heavy cargo and not worry of it'd fall off or not. So the crossbars gives you extra protection for your cargo.

Last edited: Nov 9, 2024

Functions Of The Rivian R1T Crossbars

Vincent

Member

Recent

installing of EveryAmp snapPlate on R1T

How to: TIGHT parking for R1S in garage

More Power & Faster in Rivian All Purpose Than Rivian Sport Mode - Confirmed with Data/Dragy

DIY: Black-out window shades for camping in my R1S

Custom Made 6' Hose for my R1S Air Compressor

DIY: 3 Cargo Crossbars on One Key for your R1S

the installation and software setup of the Rivian wall charger in a nutshell.

Rear Axle Area Fluid Leak on my R1T

Fridge Slider Install for R1S Cargo Area

BestEVMod Frunk Liners Installed for my R1S

Cross Bar Unboxing and Install on my R1T

Go Rhino Universal Hitch Step for Rivian: Not a perfect fit for R1S

Similar threads