Rivian Mom
Active Wheeler
- Joined
- Oct 20, 2024
- Messages
- 350
- Reaction score
- 30
- Rivian
- R1S
Needed to pass some wires from the bumper to the inside of the frunk so there was a need to remove the frunk tub. Now, removal is pretty straightforward.
-First you have to remove the four plastic covers surrounding the frunk. The front piece is magnetic and the others have simple clips, just gently nudge them upwards and they release pretty easily.
-Next, you remove the 6 screws (circled red). 2 up front, 2 in the rear, and one on each side.
-Unclip the two plugs on each side (circled red).
-Lift out the tub and enjoy the brilliant engineering.
Its quite easy and I hope someone finds this helpful.
-First you have to remove the four plastic covers surrounding the frunk. The front piece is magnetic and the others have simple clips, just gently nudge them upwards and they release pretty easily.
-Next, you remove the 6 screws (circled red). 2 up front, 2 in the rear, and one on each side.
-Unclip the two plugs on each side (circled red).
-Lift out the tub and enjoy the brilliant engineering.
Its quite easy and I hope someone finds this helpful.
