Rivian Mom
Active Wheeler
- Joined
- Oct 20, 2024
- Messages
- 271
- Reaction score
- 30
- Rivian
- R1S
There is a good bit of misinformation/conjecture about the underbody shield being integral to pack structure and something that is bonded to the packs when they are built. This is false. The shield absolutely can be removed (and retrofitted to a pack without it). The hole locations are identical to the 'on road' pack.
Note: It is obviously very heavy. Don't do this. If you do this, I told you not to. If you refuse to listen to me, do not try to remove this without proper equipment to support the shield. Alternatively, turn your vehicle upside down to remove it. But this is dangerous. DO NOT do any of this.
Also, I wasn't the one who had it removed.
Note: It is obviously very heavy. Don't do this. If you do this, I told you not to. If you refuse to listen to me, do not try to remove this without proper equipment to support the shield. Alternatively, turn your vehicle upside down to remove it. But this is dangerous. DO NOT do any of this.
Also, I wasn't the one who had it removed.
