REPLACING YOUR R1S FLOOR MAT

installing of EveryAmp snapPlate on R1T

Morgan · 2024-12-22T17:10:59+00:00

Now that I've installed the SnapPlate front license plate holder, I finally filled out the EveryAmp review. Here it is. Hope it helps others: Shipped promptly, so the license plate holder arrived well before we picked up the car. Engineered and built VERY precisely to hold the plate very close to the front bumper without scraping. Installation instructions were clear, would have benefited from one more picture showing how to find the center slots in the grille. Grille Depth Adjustment instructions were also clear; with one half-turn adjustment of three screws, the license plate holder fit PERFECTLY in place. Check the EveryAmp web site for photographs of how much their product blocks the front camera image at every setting. After reviewing the photos, I chose the center setting. I find the camera interference at that setting is trivial for me. There's a lot of competition for the front-of-R1 real estate. My understanding is that Rivian's front plate holder requires drilling a hole in a perfectly good vehicle, and can also block a small part of the camera image. Tow hook mounts take a tow hook out of commission, and can block a sensor. EveryAmp's mount is designed to protect the grille by snapping off when attacked by a car-wash brush, so you have to dismount it (relatively easy to do) and remount it before washing. I'm still happy with the EveryAmp product, which we have installed in our R1S and now R1T. Very best wishes!

Rivian Mom

Member

Oct 31, 2024

insta-save.net_InstagramPost_rivian_automotive_parts_3452608059325816232.heic.jpg

Having to replace your R1S floor mat is one of the easiest things to do that you certainly do not need to go to a shop to carry. If your floor mats are bad, all you need to do is to purchase new floor mats, which you can do on the Rivian website or an aftermarket dealer you know you can get the same quality from. Once you've purchased the new mat, you just take out the old ones and replace them with the new one you got. It's that simple and easy. Having a perfect and shiny floor mat gives the interior of your vehicle a great look and a nice feel too.

insta-save.net_InstagramPost_rivian_automotive_parts_3452608059309201022.heic.jpg

REPLACING YOUR R1S FLOOR MAT

Rivian Mom

Member

Recent

installing of EveryAmp snapPlate on R1T

How to: TIGHT parking for R1S in garage

More Power & Faster in Rivian All Purpose Than Rivian Sport Mode - Confirmed with Data/Dragy

DIY: Black-out window shades for camping in my R1S

Custom Made 6' Hose for my R1S Air Compressor

DIY: 3 Cargo Crossbars on One Key for your R1S

the installation and software setup of the Rivian wall charger in a nutshell.

Rear Axle Area Fluid Leak on my R1T

Fridge Slider Install for R1S Cargo Area

BestEVMod Frunk Liners Installed for my R1S

Cross Bar Unboxing and Install on my R1T

Go Rhino Universal Hitch Step for Rivian: Not a perfect fit for R1S

Similar threads